Lithium Battery Charger Board ESS-0000728

text.skipToContent text.skipToNavigation

ဝယ်ယူရန် ပစ္စည်းအမျိုးအစားများ ဆိုင်များ ရောင်းချသူများ အထူးလျှော့ဈေးများ ပစ္စည်းပို့ဆောင်ခြင်းနည်းလမ်း

မြို့နယ်ဖြည့်သွင်းပါ

Lithium Battery Charger Board ESS-0000728

Lithium Battery Charger Board ESS-0000728 ID: essgadgets_5555549300085_1

Sold by ESS Gadgets

11,000 Ks

ပို့ဆောင်ခြင်း

ပုံမှန်ပို့ဆောင်ခြင်း

ပစ္စည်းရှိသည်

သင့်ဈေးဝယ်ခြင်းအတွင်းသို့ ထည့်ပါ

အဓိကသတင်းအချက်အလက်

Country of Origin : China
Description :Product Description
Reminder: It is not recommended to use power batteries or pointed 18650 batteries, and it is not recommended to use lithium batteries with protective plates, let alone 3.2V or 6V batteries. It is recommended to use 3.7 to 4.2V polymer batteries or flat 18650 batteries
Parameters:
1. Size: 6.5*2.5*0.1cm
2. Weight: 10.8g
3. IR of PCM: ≤65mΩ
4. 0V change allowed: Yes
5. Constant current: 2.4A
6. Dual output current: 5V 2.4A
7. Input voltage B+ to B-: 3.0-4.2V
8. for charging Wire: Three USB cables that support iPhone Lightning and Andriod Type-C Micro USB
Button Function: Press and hold the button after standby, and the LED digital screen displays the Power

Specifications:
- [LED Indicator Display]
1. The LED digital screen displays the current battery level when charging.
2. When discharging, the LED digital screen displays the current power and saves the display in about 30 seconds (double-click the button to restore the display).
3. The system will provide accurate battery indication when fully charged and discharged.

- [Prevention of overcharge protection]
1. Detection voltage: 4.20±0.05V
2. Release voltage: 4.100±0.05V
3. Detection delay time: <200 milliseconds

- [Prevention of over-discharge protection]
1. Detection voltage: 3.0±0.10V
2. Release voltage: 3.10±0.10V
3. Detection delay time: <100 ms

- [Short circuit protection]
1. Short detection delay time: < 50 μS
2. Release condition: Cut-off load

- [Normal current consumption]
1. Normal current consumption of PCM: 60 μA max
2. Standby current consumption: 50 μA max [Recommended operating conditions]
3. Maximum continuous charge/discharge current: 1.5/2.4A
4. Suggested operating temperature: -5~45℃

- Note: The positive pole of the battery is connected to B+, and the negative pole is connected to B-, do not reverse it. If reversed, it will run out!!!!
- The module is a portable backup power supply whose input matches a 5.0V adapter to charge the internal battery. Provides 5.0V/3 for external devices using the portable device's built-in battery
Package Include

1 * DIY power bank circuit board